Contact Us+8615920505396


Middle Size Stable SMT Reflow Oven for LED Lamps

Dec 26, 2016

Basic Info
  • Model NO.: Jaguar A8

  • Weight: 800kg

  • Length of Heating Zones: 2800mm

  • Mesh Belt Width: 400mm

  • Conveyor Speed Range: 0-1500mm/Min

  • Conveyor Height: 880mm

  • Specification: CE

  • HS Code: 85151900

  • Dimension: 4200X750X1490mm

  • Number of Heating Zones: up 8/Bottom 8

  • Number of Cooling Zones: 2

  • Converyor Direction: L-R / R-L

  • Conveyor Method: Mesh Belt

  • Trademark: Jaguar

  • Origin: Shenzhen, China

Product Description
Middle Size Stable SMT Reflow Oven for LED Lamps
Product Description
Main product : reflow oven, smt reflow oven, reflow solder, reflow soldering,smt mounter,Smt Pick and Place Machine,Smt Placement Machine,Smt Mounting Machine, Pcb Machine,Smt Equipments


ModelJaguar A8
Outside dimension4200*700*1320mm
Standard colorcomputer grey
Number of heating zonesup8/bottom 8
Number of cooling zones1
Length of heating zones2800mm
Electric supply required5 line 3 phase 380V 50/60 HZ
Warming timeApprox. 20 mins
Heating timeUp:hot air; bottom: IR
Temperature setting rangeRoom temp. -350 Degrees Celsius
Control systemPID+SSR/PLC+PC
Temperature control methodPID Close loop control&SSR Driving
Temperature control precision±1.0 Degrees Celsius
Temperature deviation on PCB±2.0 Degrees Celsius
Data storageProcess data and status storage(80 GB)
Abnormal alarmAbnormal temp.(extra-high/extra -low temperature)
Board dropped alarmTower light:yellow-warming;green-normal;red-abnormal
Max. Width of pcb320mm
Conveyor height880±20mm
Conveyor directionL-R/R-L
Conveyor speed range0-1500mm
Pcb transmission agentMesh
Normal power5.5KW
Start-up power24KW

1. Heating system adopts Lead smt Patent Heating technology.
2. Hot air no-contact output supported by imported large current solid-state relay, safe and reliable, meanwhile equipped with special SSR radiator, greatly improve the cooling efficiency, enjoy loner lifetime of the machine.
3. Heating devices used high quality components; ensure the whole system goes smoothly.
4. Combined with temperature controller PID fuzzy control function, has been monitoring the change of the ambient temperature and heat value ,with the minimum pulse control heating device , fast response, guarantee the temperature control precision ,minimize temperature distribution differences inside the oven ,the length direction of the temperature distribution accords to IPC STANDARDS .
5. Heating zone Module design, convenient for maintenance.
6. Sound and Light alarm when the temperature beyond the limit, with error analysis functions.
7. With small hot air cycle system design, up and down heating, good thermal compersation, perfect hot source efficiency, warm-up fast, suitable for BGA, CSP and 0201 ect, components solder welding .Unique forced hot air cycle structure, make components on PCB heated evenly.
8. Winding system adopts advanced wind air channel, working uniformly, with high hot source exchange.
9. Pre-heating zone, welding zone, cooling zone, cooling zone, up and down heating separately, independent cycle and temperature control, adjacent/beside zone temperature difference maximum value can reach 100 °C .No temperature exchange between zones, each zone temperature and wind speed can be adjusted.
10.Imported high temperature resistant motor straightly drive the hot air recycle, good heating balance, run smoothly, long lifetime, low noise, shock less .
11. Zones power match properly, warm-up fast, from room temperature to working temperature need 20 minutes, with hot source compensation function
12. Independent cooling zone, ensure the low temperature when PCB come out.
13. Transmission system adopts Japanese Frequency Motor, combined with 1:150 imported turbine reducer, running stably, the speed of 0-1500mm/min is adjustable.
14. Standing supported by independent wheels, with special stainless steel mesh belt, durable wearing resistant, especially for BGA, CSP and 0201 welding.
15.Rail + mesh belt transmission optional.